A
-
Activated Carbon
Numerical study on the performance of a solar adsorption chiller with working pair of
activated carbon / Methanol [Volume 22, Issue 4, 2020, Pages 6-23]
-
Active car suspension system
Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2020, Pages 121-141]
-
Adaptive control
Modeling and Adaptive Control of Temperature and Humidity of a Museum [Volume 22, Issue 3, 2020, Pages 80-98]
-
Annular plate
Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
-
Anti-plane impact loading
Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2020, Pages 99-120]
-
Articulated Vehicles
Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
B
-
Boiling heat transfer coefficient
Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
-
Bolotin’s method
Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2020, Pages 30-55]
-
Brinkman-Forchimehr general model
Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
-
Bubble departure diameter
Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
-
Bubble departure frequency
Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
-
Buckling
Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
-
Buckling
Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method [Volume 22, Issue 4, 2020, Pages 51-71]
C
-
Chebyshev polynomials
Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
-
Chevron pattern
Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2020, Pages 154-171]
-
Cogeneration
Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
-
Compressor
Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system [Volume 22, Issue 4, 2020, Pages 172-204]
-
Computational fluid dynamics
The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
-
Computational fluid dynamics
Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
-
Continuum damage-healing mechanic
A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2020, Pages 6-29]
-
Crack internal
Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites [Volume 22, Issue 1, 2020]
-
Cubature Kalman filter
GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
-
Cylindrical Panels
Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
D
-
Debonding
Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites [Volume 22, Issue 1, 2020]
-
Deep Cylindrical Panel
Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2020, Pages 164-182]
-
Different wall shape
The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
-
Double twisted-tape
Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
-
Dynamic
Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2020, Pages 142-163]
-
Dynamic instability
Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2020, Pages 30-55]
-
Dynamic stress intensity factors
Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2020, Pages 99-120]
E
-
Economic Analysis
Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system [Volume 22, Issue 4, 2020, Pages 172-204]
-
Elastic foundation
Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2020, Pages 30-55]
-
Electrowinning cell
The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
-
Energy Analysis
Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
-
Event-triggered control
Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2020, Pages 121-141]
-
Exergoeconomic Analysis
Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
-
Exergy
Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
-
Exergy
Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
-
Exergy
Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system [Volume 22, Issue 4, 2020, Pages 172-204]
-
Exergy Analysis
Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
-
Experimental Validation
The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
-
Explosive loading
Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
-
Extended Kalman Filter
GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
F
-
FEM
Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
-
FEM
Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
-
FG beam
Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2020, Pages 142-163]
-
FGCNT
Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
-
Finite element methode
Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
-
Finite strain
Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
-
First order Mirsky-Herman theory
Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
-
FSDT
Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
-
Functionally Graded Carbon Nanotube Composite
Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2020, Pages 164-182]
-
Functionally graded carbon nanotube reinforced composite
Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
-
Functionally graded materials
Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
-
Functionally orthotropic half-plane
Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2020, Pages 99-120]
-
Fuzzy logic
development an intelligent system for discretionary lane change behaviors in the real traffic flow [Volume 22, Issue 3, 2020, Pages 206-227]
G
-
Generalized Differential Squares Method
Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method [Volume 22, Issue 4, 2020, Pages 51-71]
-
Gibbs potential energy
A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2020, Pages 6-29]
-
GPS data
GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
-
Graded foam core
Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
-
Graphene Nanofibers
Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method [Volume 22, Issue 4, 2020, Pages 51-71]
H
-
Heat Transfer
Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2020, Pages 24-50]
-
Heat transfer coefficient
Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
-
Heat transfer coefficient
Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2020, Pages 154-171]
-
Heat transfer zone
Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2020, Pages 154-171]
-
H∞ performance index
Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2020, Pages 121-141]
-
Hydrodynamic simulation
The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
-
Hydrogel Bilayer
Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
-
Hyperthermia
Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]
I
-
Inlet Blade Angle
Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
-
Interlayer contamination
Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites [Volume 22, Issue 1, 2020]
-
Internal combustion engine
Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
-
Internal combustion engine
Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
J
-
Jackknife
Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
K
-
Kinematic optimization
Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
L
-
Lateral Stability
Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
-
Lattice Boltzmann Method
The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
-
Lattice Boltzmann Method
Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
-
Layered Composites
Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites [Volume 22, Issue 1, 2020]
-
Low velocity impact
Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
-
Lyapunov-Krasovskii theorem
Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2020, Pages 121-141]
M
-
Magnetic field
The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
-
Magnetic nanoparticles
Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]
-
Mass transfer coefficient
The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
-
Mathematical modeling
Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
-
Mathieu type equations
Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2020, Pages 30-55]
-
Mechanical Loading
Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2020, Pages 164-182]
-
Modeling
Model Predictive Controller Design for Lateral Behavior in Real Traffic Flow [Volume 22, Issue 1, 2020]
-
Moving Mass
Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2020, Pages 142-163]
-
Museum
Modeling and Adaptive Control of Temperature and Humidity of a Museum [Volume 22, Issue 3, 2020, Pages 80-98]
N
-
Natural convection
The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
-
Natural convection heat transfer
Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
-
Nonlinear system
GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
-
Non-Newtonian fluid
The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
-
Numerical analysis
Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
-
Nusselt number
Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM [Volume 22, Issue 4, 2020, Pages 72-87]
O
-
Office building
The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
-
OpenFOAM
Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM [Volume 22, Issue 4, 2020, Pages 72-87]
-
Orientation
The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
P
-
Parabolic Trough Collector
Numerical study on the performance of a solar adsorption chiller with working pair of
activated carbon / Methanol [Volume 22, Issue 4, 2020, Pages 6-23]
-
Physical adsorption
Numerical study on the performance of a solar adsorption chiller with working pair of
activated carbon / Methanol [Volume 22, Issue 4, 2020, Pages 6-23]
-
Pontryagin’s Minimum Principle
Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
-
Porous media
Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
-
Porous media
Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
-
Pressure drop
Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2020, Pages 154-171]
-
Produced carbon
The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
-
Pulsating Flow
Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
R
-
Rankin organic cycle
Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
-
Redundancy
Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
-
Redundant Robot
Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
-
Reinforced Composites
Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2020, Pages 164-182]
-
Representative Elementary Volume scale
Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
-
Residual stresses
Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
-
Ritz method
Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
-
Rotating obstacle
Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2020, Pages 24-50]
S
-
Satellite positioning
GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
-
Semi-analytical solution
Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
-
Shock tube
Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
-
Slip velocity
Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM [Volume 22, Issue 4, 2020, Pages 72-87]
-
Solar air collector
Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
-
Solar air heater
Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
-
Solar heat gain
The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
-
Swelling induced bending
Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
T
-
Termal barrier coating
Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
-
Thermal conductivity
An investigation of thermal conductivity dependence of hybrid nanofluids containing carbon nanotubes on temperature and time [Volume 22, Issue 2, 2020, Pages 74-84]
-
Total site
Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
-
Total site utility
Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
-
Tractor Semi-Trailer System
Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
-
Transient heat transfer
Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
-
Turbocharger
Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
-
Turbulent flow
Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2020, Pages 24-50]
-
Two-pipe heat exchanger
Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
V
-
V grove absorber plate
Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
-
Virtual work principle
Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
-
Volterra dislocation
Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2020, Pages 99-120]
W
-
Waste heat recovery
Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
X
-
XRD
Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
Your query does not match with any item